|
Til Forsiden
Hytteprodukter
Lekestuer, Boder, Småhus
Hage og Parkprodukter
Utepeiser og Griller
Aluminiumsstiger
Norske Flagg og Vimpler
Lekeapparater, husker etc
Ballspill etc
Garderobeskap og Utstyr
Garderobeskap
Hyller og
reoler
Strykebrett
Buksepresser
Baderomsspeil
Skopussemaskiner
Safer og
Sikkerhet
Badeflåter, Stupebrett
Robåter og Motorbåter
Båt og Bilhengere
Kano, Kajakk
Kart - Sjø
og Land
GPS, Bilnavigasjon
Jakt og
Friluftsutstyr
Hundeprodukter
Bordtennis
Biljard og Biljardutstyr
Minigolf
Nordic Cab Produkter
Kjøleprodukter
Skole og
Undervisning
LCD-TV
Underholdning
Til Vinterbutikken.no
Til Linhuset.no |
Disse skopussemaskinene passer på hoteller, institusjoner,
bedrifter, kontorer - og faktisk også til privat bruk. Maskinene er
produsert i Tyskland. Vi sender over hele Norge - lav frakt.
(priser er ex. mva).
Bestill
på skjemaet nederst på siden eller ring 66917320
Skopussemaskiner Cosmo
og Cosmo plus (nedenfor) fåes i sølv (RAL 9006), Hvit (RAL
9016), Claret (RAL 3004), Graphite (RAL 7022), Blå (RAL 5013), Light
Ivory (RAL 1015), Metallic Gold og Sort (RAL 9005),
samt også andre farger mot pristillegg
 |
Easy Comfort
Easy Comfort er en liten firkantet maskin med 3 børster. 10
kg. 49x30x31.5cm. Passer fint til hjemmebruk,
lite kontormiljø, etc.
GrafittfargetSkokrem koster NOK
295 pr. l.
Case: graphite
Polish dispenser:
0.2 liter with plastic ball valve
Brushes: 2 polishing brushes
1 pre-cleaning brush Ø 13cm x 6cm
Weight: 10kg net, 11kg gross
Contact switch: on the case
Power supply: 230 volt, 100 watt, 1100 rpm
NOK 2.995
Perfekt til hjemmebruk og til små kontorer
|
 |
Cosmo
The Cosmo series has convincing style, functionality and
compactness.
Cosmo is available in numerous standard colors and can be coated
in any RAL color our customers ask for. Thus the elegant shoe
shine machine becomes an individual companion, which integrates
perfectly into your existing ambience.
The case made from max. 8mm cast aluminum is very durable and
due to its weight the machine can be easily operated by means of
a foot sensor. A high dead weight guarantees stability.
Shoe shining can hardly be more thorough, faster and easier
especially in sophisticated households with emphasis on style
and satisfying functionality.Dimension:
60 cm x 38 cm x 32 cm
width x depth x height
Polish dispenser: 0.75 l with ball valve
Brushes: ø 13 x 7 cm diameter x width
Weight: 14 kg net, 16 kg gross
Starter: Sensor with timer
Power supply: 230 volt. 130 watt, 1200 rpm
NOK
4495
Passer for sofistikert hushold, mindre kontorer, f.ex.
advokatkontorer o. lign. |
 |
Cosmo plus
The Cosmo plus is an enhanced version of the Cosmo series.
The additional bar made from highly polished stainless steel
make the Cosmo plus look even more aesthetic than the smaller
Cosmo version. The modified design changes the function: an
ergonomic contact button integrated in the bar starts the
machine for as long as the user pushes it down. Moreover, the
handle bar provides a secure hold while using the machine and
prevents that nearby walls will get stained from users touching
it while balancing on one foot.
The Cosmo plus enjoys great popularity in households with a
raised standard of living, smaller hotels, boarding houses or
offices looking for a decent but reliable shoe shine service
with elegant design.
Dimension:60 cm x 42 cm x 95 cm
length x depth x height
Polish dispenser: 0.75 l with ball valve
Brushes: ø 13 x 7 cm diameter x width
Weight: 16 kg net, 20 kg gross
Starter:on the bar
Power supply:230 volt 130 watt, 1200 rpm
De 3 børstene er henholdsvis til rengjøring, pussing og
polering (alle er utskiftbare)
NOK
6395
Passer for mindre kontorer, resepsjonslokaler, hoteller,
politistasjon, brannstasjon, o. lign. |
 |
Elégance Nature
Elégance Nature is the compact version of the Elégance Nature
plus.
Its elegant and high-class wooden case harmonizes extremely well
with ambience of classic style and contributes and completes the
interior. The warm wooden exterior of the machine almost
conceals the power that hides underneath. Just like the Elégance
Couleur the Elégance Nature is a perfect shoe shine machine
which requires very little space and still has a powerful and
strong motor. With its stylish form and modest dimension this
model becomes an ideal equipment in private households, smaller
boarding houses, hotels and offices, which have a wooden
ambience.
A new variant is our Elégance Nature model in black with real
leather coating on the top.Case:natural wood(available in dark
walnut, mahogany,cherry, natural wood or in any finish wished
for by our customers)
Dimension:50 cm x 30 cm x 36 cm
length x depth x height
Polish dispenser:1 polish dispenser
(0,75 liter with stainless steel ball valve)
Brushes:1 horsehair pre-cleaning brush
2 wool yarn polishing brushes (Ø 13 cm x 7 cm)
Weight:16 kg net, 18 kg gross
Starter:Sensor with timer
Power supply:230 volt, 130 watt, 1200 rpm
NOK 6195
Passer i private hjem, kontorer, mindre resepsjoner,
politistasjon, brannstasjon m.v. |
|
|
Ellipse V2A
With its extravagant and eye-catching form the Ellipse turns
into a design highlight in your entry area.
Two different versions of the Ellipse turn the shoe polishing
into something extraordinary. The results of both machines,
whether it has a polish dispenser or not, will be: quick,
precise, satisfying and most of all shining – just like the
high-quality brushed stainless steel surface of this design
highlight presents itself.
Whether the model Ellipse will be placed next to a wall, in a
corner or standing freely in the room, with its classic column
design it always cuts a fine figure. Especially spacious
corridors, wide entrance halls or stylish lobbies will be
appropriate sites for a machine like this.Color of the case:
stainless steel brushed
Dimension: 44 cm x 127 cm
Deliverable alternatively:instead of the 2nd polishing brush, a
polish dispenser of
0.75 liter content with a ball valve for leather polish is
available
Brushes: 2 polishing brushes; 1 pre-cleaning brush; ø 22 cm x 8
cm
Weight:47 kg net, 50 kg gross
Power supply: 230 volt; 150 watt, 700 rpm
Starter: Sensor with timer
NOK
16950
Passer i større resepsjonslokale - meget elegant og dekorativ |
 |
Polifix 2
The Polifix 2 is a heavy shoe polishing machine and very popular
as a model for floors in office buildings. The user de- termines
how long the three wide brushes will run by means of the contact
switch, which is placed on the bar. This strong model is
equipped with a removable rubber mat and sole wipers. The
version Chrome is very elegant and fits in very well into every
environ- ment. The lacquered version is a bit more quiet and
down-to-earth.Case:
agate-grey,
graphite or Chrome
Dimension:56 cm x 31 cm x 94 cm
length x depth x height
Polishing dispenser:0.75 liter container
with ball valve
Brushes:2 polishing brushes
1 pre-cleaning brush;ø 22 cm x 8 cm
diameter x width
Weight: 25 kg net, 27 kg gross
Contact switch:on the bar
Power supply:230 volt, 150 watt, 700 rpm
NOK
8950
Passer for større kontorlokaler, hoteller, resepsjonslokaler |
 |
Polifix 3 Steel
The versatility of the Polifix 3 is unmatched.
This shoe polishing machine is our top-seller - in use in hotels
and administration offices world-wide. Known for its satisfying
convenience, high-quality workmanship and its brilliantly gentle
shoe polishing.
With the Polifix 3 we put special emphasis on personal and
individual design options in order to make the machine fit best
into any place you want. This model offers a large number of
possible configurations. Especially the lockable door on the
front, which is available in many different colors, makes the
Polifix 3 adaptable to floors, walls or furnishings.Case: matt
black
Color of the doors: stainless steel; embossed or brushed, ;brass
brushed
Dimension: 56cm x 31cm x 85cm
width x depth x height
Polish dispenser: 1 liter disposable
bottle with ball valvel
Brushes: 2 polishing brushes ; 1 pre-cleaning brush ; Ø 22cm x
8cm diameter x width
Weight: 33 kg net, 36 kg gross
Starter: Sensor with timer
Power supply: 230 volt 150 watt, 700 rpm
NOK
11950
Passer for større kontorlokaler, hoteller, resepsjonslokaler,
industribygg, mv |
 |
Politec Solar
Our shoe polishing machine Politec series was designed for
entrance and passage areas with a high frequency. Each version
will be mounted to the wall but you have the choice between
Politec Solar for indoor and Politec Polar for outdoor usage.
Both solutions will make the dirt stay outside. The ergonomic
bow handle will grant firm hold to users while cleaning shoes.
In particular cleansing work boots is made easy due to the very
large and hard brushes.
Honeycombed rubber mats with integrated sole wipers to support
the cleaning process come with both versions of the
Politec.Case:
powder coated steel,silver metal
Colors of the bow handle:red, blue or black,
if required every RAL colorat surcharge
Dimension:66 cm x 34 cm x 114 cm
length x depth x height
Polish dispenser:0.75 liter container
with ball valve
Brushes:1 nylon pre-cleaning brush
1 soft wool yarn polishing brush
ø 22 cm x 16 cmdiameter x width
Weight:31 kg net, 35 kg gross
Starter:Sensor with timer
Power supply:230 volt, 240 watt, 750 rpm
NOK
12450
Passer ved inngang til
kontor/institusjon-, lagerbygning, fabrikkbygning, etc. |
 |
Politec Polar
Our shoe polishing machine Politec series was designed for
entrance and passage areas with a high frequency. Each version
will be mounted to the wall but you have the choice between
Politec Solar for indoor and Politec Polar for outdoor usage.
Both solutions will make the dirt stay outside. The ergonomic
bow handle will grant firm hold to users while cleaning shoes.
In particular cleansing work boots is made easy due to the very
large and hard brushes.
Honeycombed rubber mats with integrated sole wipers to support
the cleaning process come with both versions of the
Politec.Case:
powder coated steel,silver metal
Colors of the bow handle:red, blue or black,
if required every RAL colorat surcharge
Dimension:66 cm x 34 cm x 114 cm
length x depth x height
Polish dispenser:0.75 liter container
with ball valve
Brushes:1 nylon pre-cleaning brush
1 soft wool yarn polishing brush
ø 22 cm x 16 cmdiameter x width
Weight:31 kg net, 35 kg gross
Starter:Sensor with timer
Power supply:230 volt240 watt, 750 rpm
NOK
11450
Passer ved inngang til
kontor/institusjon-, lagerbygning, fabrikkbygning, etc. |
Sålerengjøringsmaskiner
Gir bedre hygiene og bedre trivsel overalt.
Bidrar til kostnadsreduksjoner ved renhold av offentlige bygninger,
fabrikker, lagerbygninger og større kontorlokaler.
 |
Solamat 90
The Solamat 90 sole cleaning unit is designed with four
brushes, which are counter rotating and clean the soles from
underneath. Two lateral disk brushes clean the edges of the
soles. Brushed off dirt falls into a large drawer at the
bottom of the device. This drawer can be removed and leaned
easily.Drive:
belt drive and strong motor
Colors: agate-grey with black ergonomic handle bow or
graphite with red ergonomic
handle bow
Dimension: 46cm x 56cm x 114cm
width x depth x height
Brushes: 4 nylon wheel brushes,
2 nylon disk brushes
Weight: 47kg net, 50kg gross
Starter: Sensor with timer
Power supply: 230 volt 180 watt, 750 rpm (for brush gear)
NOK 17950
Passer til politistasjoner, brannstasjoner, helsestasjoner,
golfklubber, mm
|
 |
Solamat 100
Solamat 100 and 200 have a slightly different design: four
wheel brushes clean the soles and two lateral disk brushes
clean the edges of the shoes, while the uppers are cleaned
by a third brush. Brushed-off dirt falls into a large drawer
here as well. A belt gear ensures powerful brushing while
running smoothly at the same time.Drive:
belt drive and strong motor
Colors: graphite or agate-grey
Dimension:
46cm x 60cm x 110cm
width x depth x height
Weight: 60kg net, 64kg gross
Bristles:
wheel and disk plate: nylon
upper brush: horsehair
(optionally: nylon – at no
additional cost)
Starter: Sensor with timer
Power supply:
230 volt
180 watt, 750 rpm (for brush gear)
NOK 26950
Passer til politistasjoner, brannstasjoner, helsestasjoner,
golfklubber, mm
|
 |
Solamat 200
Solamat 100 and 200 have a slightly different design: four
wheel brushes clean the soles and two lateral disk brushes
clean the edges of the shoes, while the uppers are cleaned
by a third brush. Brushed-off dirt falls into a large drawer
here as well. A belt gear ensures powerful brushing while
running smoothly at the same time.
Solamat 200 is equipped with an additional exhaust and
filtering system, which is placed inside the upper part of
the case. Dust and aerosols are sucked into the upper part
by means of under-inflation and they are collected by a
filter. Cleaned air exits via a grid at the rear side of the
case; the filter mat can be exchanged easily.Drive: belt
drive and strong motor
Colors: graphite or agate-grey
Dimension: 46cm x 60cm x 110cm
width x depth x height
Weight: 62kg net, 66kg gross
Bristles: wheel and disk plate: nylon
upper brush: horsehair (optionally: nylon – at no additional
cost)
Starter: Sensor with timer
Power supply: 230 volt , 180 watt, 750 rpm (for brush gear)
Exhaust volume: 360m3/h (with filter mat 500g/m2)
Filter classes: according to DIN 24185 – EU 4
according to EN 779 – G 4; Exhaust and
filtering system
NOK 36950
Passer foran inngang til støvutsatte lokaler, f.ex. større
bakerier mm - rengjør på oversiden av skoen |
 |
Solamat 400
Dry or wet sole cleaningThe innovative sole cleaning devices
Solamat 400, 450 and 500 close the gap between our Soltec
and Solamatic range on the one hand side and the smaller
stations Solamat 90, 100 and 200 on the other side.
These high quality industry devices are made entirely from
stainless steel. They should be used as a forced pathway
which all users have to pass. Before entering the actual
cleaning area the user will be recognised by an optical
sensor located in the hand rail. This sensor automatically
starts the counter-rotating wheel brushes and switches the
machine off when the user has left the device.
Solamat 400 and 450 are made for dry cleaning, where brushed
off dirt will be collected in a drawer at the bottom of the
machine, which can be easily pulled for cleaning
Drive: belt drive and strong
motor
RPM of the brushes: via frequency inverter
continuously variable
Dimension: 70cm x 75cm x 18,5/128cm
width x depth x height
Dimension of brush area: 40cm x 50cm x 1cm width x depth x
height
Brushes: nylon fiber: 0,40mm, black, hard
Weight: 90kg net, 102kg gross
Start/Stop automatism: via optical sensor
Power supply: 230 volt
Motor: 0,18kW, 50Hz, Iso-Cl F, IP 55
NOK 48950
Unngår transport av søle og støv mellom soner i industri og
næringslokaler. Rengjør begge ben samtidig og kan settes opp
som en sluse mellom 2 adskilte soner. |
 |
Solamat 500
Dry or wet sole
cleaning: These high quality industry devices are made
entirely from stainless steel. They should be used as a
forced pathway which all users have to pass. Before entering
the actual cleaning area the user will be recognised by an
optical sensor located in the hand rail. This sensor
automatically starts the counter-rotating wheel brushes and
switches the machine off when the user has left the device.
Solamat 500 is a wet cleaning unit and requires a ½"
connection for water input. When the machine starts, a
solenoid valve opens and feeds water to the bin and brushes.
A separate hose pump can add cleaning fluids or
disinfectants while a regulator is responsible for a
constant level. The wheel brushes take up water plus
optional cleaning media and transport both towards the soles
to be cleaned. Effluent water is drained away from the
machine’s bin and should be fed into drainage. A drip-off
grate behind the brushing area minimizes further water
transportation. With a 1" drain cock dirty water can be let
offDrive: belt drive
and strong motor
RPM of the brushes: via frequency inverter
continuously variable
Dimension inclusive drip-off grate:
70cm x 150cm x 18,5/128cm
width x depth x height
Dimension of brush area: 40cm x 50cm x 1cm width x depth x
height
Brushes: nylon fiber: 0,20mm, black, smoothly waved
Solamat 500: Dry or wet sole cleaningWeight: 107kg net,
123kg gross
Start/Stop automatism:
via optical sensor
Power supply: 230 volt (110 volt optionally)
Motor: 0,18kW, 50Hz, Iso-Cl F, IP 55
Specifics: ½" water supply with solenoid valve. Pressure can
be regulated from 0 – 1,6bar. Hose pump with 0,15 – 4,5l /
hour water throughput. Drain cock with 1" exit
NOK 62950
Unngår transport av søle og støv mellom soner i industri og
næringslokaler. Rengjør begge ben samtidig og kan settes opp
som en sluse mellom 2 adskilte soner. |
 |
Neptun I
A comfortable handle switch starts the robust Neptun I sole
cleaning unit. On startup, a magnetic valve will provide the
water supply. By means of an adjustable feeding pump, a
cleaning or disinfectant medium can
be mixed with the water.Case:stainless steel design
Water consumption:approx. 5 liters per minute
Dimension:65 cm x 106 cm x 120 cm
length x depth x height
Feeding pump:adjustable from approx. 0.01 to0.5 l/min
Weight:80 kg net, 90 kg gross
Contact switch:on the handle
Power supply:400 volt, 16 A,other voltages
optionally,three-phase current
NOK 42950
|
 |
Neptun II
The NeptunII boot-washing unit is similar to the Neptun I
sole cleaning unit, but is also equipped with two nylon
brushes, which are placed at both sides. These wheel
brushes, which are also sprayed with water and cleaning
medium, clean the bootlegs effortlessly and quickly.Case:
stainless steel design
Water consumption:
approx. 6 liters per minute
Dimension:
112 cm x 95 cm x 131 cm
length x depth x height
Feeding pump:
adjustable from approx.
0.01 to 0.5 l/min
Weight:138 kg net, 150 kg gross
Contact switch:
on the handle
Power supply:
400 volt, 16 A,
other voltages optionally,
three-phase current
NOK 63950 |
Soltec II “dry”: 270kg net
-
NOK 152.950
Soltec III “dry”: 305kg net -
NOK 164.950
Soltec II “wet”: 265kg net -
NOK 147.950
Soltec III “wet”: 300kg net -
NOK 163.950
|
Soltec II + III „wet“ and
„dry“
Soltec cleaning units for heavy duty use in industrial
environments are available in two different lengths. These
devices are designed for above ground placement and should
be positioned in a way that everyone will have to pass
through this unit.
Our Soltec “dry” version brushes dirt off shoe soles and
collects it in a large stainless steel drawer at the bottom
of the machine, which can be removed for easy cleaning.
<b/Soltec “wet” models have an ¾" input connector to feed
water by means of a solenoid valve on the two wheel brushes
while optional cleaning medium can be added with the
integrated hose pump. Sewage flows off through an 2,5"
diameter nozzle.
The grates above the brushes can be lifted for cleaning the
inside of the machine. Each unit has an ptical sensor on
both sides, which starts the drive. The follow-up time can
be regulated so that the unit will be cleaned sufficiently
after usageDrive
transmission: 2 x worm gear drive
RPM of the brushes: approx. 93 RPM
Case and handrail: made entirely from stainless steel
Dimension Soltec II: 940 x 1.900 x 1.270mm (W x L x H)
Dimension Soltec III: 940 x 2.670 x 1.270mm (W x L x H)
Brushes Soltec II: 2 à 1.000mm length, PA 6.12, 1 mm black,
hard
Brushes Soltec III: 2 à 1.600mm length, PA 6.12, 1 mm black,
hard
Weight: Soltec II “dry”:
270kg net
Soltec III “dry”: 305kg net
Soltec II “wet”: 265kg net
Soltec III “wet”: 300kg net
Start/Stop automatism: via 2 optical sensors
Power supply: 3 x 400 volt/N/PE, nominal current max 3,75A
Motor: 0,5kw, 50-60Hz, IP 64
Specifics of model “wet”
Water inlet connection R ¾", internal thread + solenoid
valve
Water outlet connection R 2½" external thread
Water pressure min. 4bar, max. 8bar
Water temperature min. 4°C, max. 42°C
Holder for max. 20 l cleaning medium tank
Soltec III, „dry |
 |
Mistral 10
Mistral drying systems are produced for professionalpurposes
with very high quality. Shoes, boots and gloves are dried
very softly by solid and maintenance-free motors, blowing
hot air for a pre-defined amount
of time. Drying time will be approximately 1-2 hours
at ambienttemperature of 25 °C / 77 °F.
The dryers can be mounted either flat to the wall or as
apair onto a special undercarriage (with 2 block wheelsand 2
steering wheels). This way it is even possible to install 2
Mistral 10 (for 20 pairs of shoes/boots)to the
undercarriage. By using an undercarriage you are more
flexible to move the dryers from one place to another if
needed.
Mounting material is included with each delivery.
Model Mistral 10 can carry up to 10 pairs of shoes / boots
or gloves.
Model Mistral 15 can carry up to 15 pairs of shoes / boots
or gloves.Power supply:
230 volt (110 volt optionally),500 watt
three phase current
Dimension:55 cm x 35 cm x 153 cm
width x depth x height
Mistral 10 Weight:25 kg net, 31 kg gros
Mistral 15 Weight:35 kg net, 41 kg gros
Mistral 10: NOK 19.950
Mistral 15: NOK 23.950
|
 |
Mistral 18
This lockable two door drying Mistral 18 cabinet was
designed particularly for working clothes, which require a
long drying time.
The air is warmed by a heater and
blown into the internal cabinet.
The table with the wet clothes turns slowly so that the
clothes are dried quickly and softly.
A turntable is mounted into the roof of the cabinet which
makes filling the cabinet easy. Moreover, the cabinet is
lockable.
Drying time can be adjusted by means of a
timer.Design:sheet-steel, powder coated
Hooks:18 pieces
Dimension:75 cm x 78 cm x 204 cm
width x depth x height
Weight:130 kg
Timer:can be adjusted individually
up to 24h
Power supply:230 volt, (110 volt optionally)
1.2 KWthree phase current
Mistral 18: NOK 33.950 |
|
Skokrem Special leather
polish - colorless |
NOK 295 |
|
Skokrem Special leather
polish - black |
NOK 345 |
|
HEUfex special
(forcleansing wool yarn brushes |
NOK 295 |
Profigate
 |
The transfer of dirt or
foreign matter is completely underestimated by manufacturing
companies. Some of the main causes of cross contamination
are the soles of shoes from staff, contractors but also from
tires of vehicles, forklifts and even trolleys wheels.
Dirt is transported inside sensitive zones. As it moves, it
continues to pick up dirt from existing area and depositing
it onto another area causing more problems. In fact, cross
contamination of dirt may result in serious problems from
contaminated products, poor quality to even a product
recall.
The only way to stop this from happening is to clean the
areas (floors) and the source of the problems, shoes, wheel
and the floor. Unfortunately, this requires time, labor and
energy. The solution is Profilgate®, a patented system that
does this automatically without high labor and energy costs.
With Profilgate® the problem can be solved directly by
targeting the main causes of the problem – the tires of
vehicles. Up to 90% of the dirt adhering to the surfaces of
the tires, soles of shoes, wheels can be removed and
captured.
And best of all, Profilgate® improves on hygiene by
complying with regulatory bodies, hygiene standards used in
the prevention of foreign matter (i.e. HACCP, SQF 2000:
Control of Physical Contaminants, BRC and ISO 22000) and
anywhere where dirt contamination is a problem.
What is ProfilGate®?
Captures dirt, foreign matter and moisture
Massive reduction in labor cleaning costs
Better product quality by improved in-plant cleanliness
Extends life of the floor or sticky mats
Improves occupational health and safety
Minimizes the risk of wet tires slippages
Reduces black tire dust which may contain carcinogens |
 |
ProfilGate® – the
allrounder
The standard version is characterized by optimal cleaning
efficiency and flexibility.
Each grate is available in 3 different widths with a height
of 45mm. It can be placed within any available space,
individually or in combination with multiple units. When it
is installed in ground, it blends with the surface and
allows smooth continuous dirt capturing in all areas that
receives up to 300 movements per day.
When the traffic movement is higher than 300 movements per
day, ProfilGate® plus is recommended. The deeper capturing
tray (65mm) allows a larger amount of dirt to be captured
Technical Data
Cleaning Grates
(Standard Sizes)
Width x Length x Height (mm) 324 x 976 x 45
702 x 976 x 45
1.012 x 976 x 45
Weight
21 kg
39 kg
51 kg
Access ramps
(checkered plate)
Width x Length x Height (mm) 324 x 1.000 x 45
702 x 1.000 x 45
1.012 x 1.000 x 45 |
Bestill
på skjemaet nederst på siden eller ring 66917320
|
|
